AirCraft Metal Swivel Elbow 10mm x 3/8' Male (SG MPH10-03)
At a Glance; 10mm push-in tube connection to 3/8" male thread in a compact 90° swivel elbow.
The AirCraft SG MPH10-03 Metal Swivel Elbow is designed for pneumatic systems that need a clean corner turn into a larger threaded port—without twisting the tubing or putting unnecessary strain on the seal. It connects 10mm pneumatic tubing to a 3/8" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening. The result is a tidier air line route, reduced stress on the tube and a more dependable, leak-resistant connection. Ideal for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where space is limited and reliability matters.
Strong, alignment-friendly 90° AirCraft metal swivel elbow fitting
A durable elbow connector for 10mm tubing and larger pneumatic ports—keeps routing tidy and alignment easy for professional results.
Extra Information
Use suitable thread sealant/PTFE tape on the male thread if required by the port type and application.
For best sealing, cut tubing square and keep the tube end clean before insertion.
After installation, pressurise slowly and check for leaks with soapy water around both the tube connection and threaded joint.
Pro Tip
Tighten the thread first, then swivel-align the elbow to your tube route—forcing the tube to “aim” the elbow can add stress and invite leaks.
Features
Swivel elbow body Rotates for alignment after tightening, improving routing and reducing tube twist.
10mm push-in tube connection Quick, secure tube fitment for efficient assembly and easy servicing.
3/8" male threaded outlet Suits larger pneumatic ports on manifolds, valves and air control components.
Metal construction Robust, workshop-ready durability for everyday compressed-air applications.
Benefits
Neat corner routing; Creates a clean 90° turn in compact spaces without kinks or awkward bends.
Reduced strain and leaks; Swivel alignment helps keep tubing relaxed and supports longer-lasting seals.
Faster system changes; Push-in tube connection speeds up installations, upgrades and maintenance.
Safety
Always depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not exceed your system’s rated pressure and inspect tubing regularly for damage or wear.
Pressurise slowly after installation and check all connections for leaks using soapy water (never use open flames).